Basic information
The chicken feed should be protected against light, ventilation, moisture, and insects, and should be regularly inspected toreduce the wastage of feed in the trough chicken. According to the age of the chickens, the suitable trough should be reasonably selected and placed in an appropriate height in combination with the size of the chicken
The right amount of feed should be mastered to avoid the wastage of feed, in some many cases, due to the improper management by the farmers. There are lots of excessive wastes in the chicken feed at the chicken farms. This not only increases the cost of chicken feed input, but also makes chicken feed in chicken farms a cause of chicken disease. Even causing unnecessary economic losses to farmers
According to the chicken farm size and the actual chicken feed procurement plan, if it is rainy days, do not feed or feed as little as possible. When it is necessary to feed, it is necessary to prepare for rain protection during the transportation of the feed, so as to avoid the rain and mildew of the feed. Improve the feeding method and feed less. The amount of feed should not exceed one third of the depth of the trough. Both the chickens are full and there is no leftover in the tank
Features
1. The problem is solved using different directions of the rods of the cage doors or feed dispensers fitted with hopper feeders equipped with restrictive gratings for chickens. Their use in the cage keeping requires changes in the design of the cage battery, which will allow using all the advantages of separate feeding of chickens and males
2. The separate feeding of chicken on this equipment is based on the use of various feed distribution systems. To distribute feed to chickens, the trough feeders are equipped with restrictive grill racks. The feeders are equipped with round hopper feeders having a diameter of 330 mm which are provided for feeding layers on a deep litter between the racks. Layer feeders are suspended by a winch system that is raised and lowered so that the hens are not feed from the rooster's feeders
3. Poultry Farmers in front of cages should carefully observe the feed intake, faeces, etc. of the chickens. If abnormalities are found, they cannot be transferred. If individual infertile chickens have therapeutic value, they can be treated separately, and once again, they will be transferred to the group cage
4. Once transferred to the cage, add antibiotics and vitamins to the material and water within one week, and still keep the bottom of the cage for about 1 week. After the adaptation, the bottom of the cage is tilted to an angle that can be rolled. Generally, it does not exceed 20 °C. The bulb used is preferably more than 2.5 m2, and it is conditional to use green light within 24 hours after entering the cage
Series of products to serve the poultry farm fully, click the name to learn more
1. Steel structure poultry house, opening type for hot countries and close type for cool countries
2. Poultry hatching equipment’s capacity of eggs up to 120,000+ to be hatching house
4. Chicken feed processing equipment from feed crushing and mixing to stock to feeding chicken
6. Egg processing equipment from automatic egg collection to packing egg to trays
7. Chicken slaughtering equipment from slaughter to vacuum package
9. Other poultry farm equipment are coming soon...
Bookmark our website and contact us now to discuss your modern poultry farm plan and quotation
Method of management
1. Feeding process
It is necessary to feed them every morning using an automatic feeder 3 times for 1 day in the cage. When using the trough, the artificial feeding should be added evenly and fed on time. It prevents the chickens from being trampled due to hunger and food. Check whether there is an empty trough every afternoon that should be replenish on time. The feeding situation of the trough should be checked by the technicians every day. When there is more material left, it is necessary to take timely measures. Analyse and judge the possible situation: there are fewer chickens in the cage, and should be replenished in time. Check if the nipple is short of water and if there are any sick chickens in the cage. Individual treatment or elimination should be picked out in time. Whether the lighting is insufficient, we must take timely measures to make adjustments
2. Nursing points
The room temperature should be strictly controlled. Before entering the chick, the room temperature should be about 30 °C, and after entering the chick, the room temperature gradually rises to about 33-35 °C. Fill the cage with the small tray in advance. The water tank is pre heated in order to pre-warm the room temperature. Drinking water should be added: glucose, astragalus polysaccharides, antibacterial drugs, and electrolysis. The purpose is to restore the chickens’ physical strength, relieve stress, kill the vertically-transmitted pathogens, promote the development of immune organs in the chickens, and improve the disease resistance of the chickens
3. Ventilation
Ventilation is required in the breeding process. Ventilation begins in the first week. The sunroof should be open, and some of the side windows should be opened moderately. The sealing should be angled upwards. When the temperature is guaranteed, the ventilation should be increased appropriately. As the age increases, the amount of ventilation gradually increases. When approaching 20 days of age, the longitudinal fan needs to be opened, because the ventilation of the side window is small and cannot meet the needs. The speed and duration of the fan should be changed according to the specific conditions. There should not be too much air otherwise the chicken will only catch a cold. If the weather is abrupt and the wind is too large the side windows should be temporarily closed
4. Timely grouping
The chicken cage is to be carried out when the chickens are at 10 days of age. If the cage is too late, the chickens will grow unevenly and the weak will be crushed to cause death. For the first time, the first cage is dividedfrom the upper layer to the middle layer. The second time, the cage is divided, and then they are separated from the upper layer to the bottom layer. The time of grouping depends on the growth of the respective chickens
5. Drinking of water
The normal water supply should be 24h guaranteed. Water control is required in addition to medication or seedlings. Always check the water line for blockages, which is a critical issue for each farm. Early detection is required. The nipple leaks water, the water that flows out wastes the drug, and it enters the septic tray to dilute the faeces and then flow into the trough. First, it will waste feed, and second, it will cause intestinal diseases
6. Temperature and humidity management
The humidity during brooding should generally be around 65 to 70%. After that, the humidity gradually decreases, which is about 60%, and it is prone to lack of humidity. It is best to take a warm water spray with chicken disinfection. If the humidity is too high, increase the temperature and increase the amount of ventilation
Our Services
1. We offer free guide on poultry house construction to our customers
2. We offer pre sale services to help customers have rightful information on the business
3. Delivery of goods directly to customers’ farm after payment
4. Installation team come for installation after customers have received the goods
5. After sale service is done as we do follow up to see the state at which the materials we supplied are
Frequently ask questions
Q: How can one reduce the wastage of feed using a layer cage?
A: They should be fed according to the age of the chickens. The suitable trough should be selected and placed in an appropriate height in combination with the size of the chickens
Q: What is the best method to rear birds?
A: Battery cage remains the best and effective method of rearing birds
Message
Products recommended
By clicking 'Allow All', you agree to the storage of cookies on your device to enhance site navigation, analyze site usage and assist with our marketing efforts.